In this post we will see to schedule reboot to wlc.
Schedule a reboot Time for WLC via CLI. This is really a good option on CLI to reboot WLC at specific time.
Let’s see the configuration guide.
What are the options on WLC CLI to reset:
(WLC1) >reset system ? at Reset the system at a specified time. in Reset the system after a specified delay. cancel Cancel a scheduled reset. notify-time Configures trap generation prior to scheduled resets. (WLC1) >
RESET SYSTEM AT:
Specify a date and time for the devices to reboot by entering this command: This command allows us to enter a specific date and time to reboot controller.
*** The swap operand in the reset command will result in the swapping of the primary and backup images on both the controller and the access point.
(WLC1) >reset system at 2014-07-11 18:00:00 image no-swap reset-aps save-config System reset is scheduled for Jul 11 18:00:00 2014. Current local time and date is Jul 11 09:10:19 2014. A trap will be generated 10 minutes before each scheduled system reset. Use 'reset system cancel' to cancel the reset. Configuration will be saved before the system reset. (WLC1) >
RESET SYSTEM IN:
Specify the amount of time delay before the devices reboot by entering this command: This command allows us to enter a specific time to reboot controller.
(WLC1) >reset system in 18:00:00 image no-swap reset-aps save-config System reset is scheduled for Jul 12 03:10:59 2014. Current local time and date is Jul 11 09:10:59 2014. A trap will be generated 10 minutes before each scheduled system reset. Use 'reset system cancel' to cancel the reset. Configuration will be saved before the system reset. (WLC1) >
RESET SYSTEM NOTIFY-TIME :
Set up an SNMP trap message that announces the upcoming reset by entering this command: After configuring this command, controller sends the announcement trap the configured number of minutes before the reset.
(WLC1) >reset system notify-time 10
A trap will be generated 10 minutes before each scheduled system reset.
(WLC1) >
RESET SYSTEM CANCEL:
Cancel the scheduled reboot by entering this command: We scheduled a system reset and need to cancel it then we just need to apply the reset system cancel command.
(WLC1) >reset system cancel
Scheduled reset cancelled.
(WLC1) >
SHOW RESET:
Use show reset command to display scheduled resets.
(WLC1) >show reset System reset is scheduled for Jul 12 03:11:51 2014. Current local time and date is Jul 11 09:11:53 2014. A trap will be generated 10 minutes before each scheduled system reset. Use 'reset system cancel' to cancel the reset. Configuration will be saved before the system reset. (WLC1) >
